1, There is already a WIFI signal, and know the WIFI password. But the signal coverage is not far enough. Buy it, set to - repeater mode. It is installed between the WIFI signal source and the room that needs WIFI.
2, There is no WIFI signal, but already have a router, and can connect to the Internet. Buy it, set to --AP mode. In this mode, it is required: connect it to the router's LAN port by network cable. Setting steps:
1,Install the device, turn on the power, waiting for the WLAN lights flashing, indicating that the device is booted completed.
2,Long press the RESET button 5 seconds to reset the device, observe the change of the indicator.
3,Turn on the laptop. Find: WiFi-Repeater and connect it.In the browser address bar input: 192.168.10.1 some browsers may need more input: http://
4.According to the use of the case, select the "Repeater mode" or "AP mode." Note:It can not be used with the MODEM which without the routing function, because it cannot dial up the Internet. Specifications:
1. The WiFi Repeater is a Combined Wired/Wireless Network Connection Device
2. Latest Software wizard for easy setup
3. Improves Wireless Coverage in all WLAN Networks
4. Support Wireless Repeater Mode and Standard AP Mode
5. Wireless access point or network extender to bring wifi to your study or work
6. Antennas integrated
7. Use it to Extend the Range of your Wifi Network Over a Wider Area or Eliminate dead-spots due to low signal power Not Suitable for Basement Accessories:
1 x US Plug Wireless Wifi Repeater
1 x Installation Manual