QualGear QG-PM-002-WHT-L Projector Ceiling Mount with Adjustable Extension Column Accessory
I paid $29.95 for this item, but had previously purchased the #1 selling VideoSecu PJ2W for $24.59. However as I got closer to doing my installation I realized the maximum 28 inch vertical drop from my ceiling that it would provide wasn't going to be enough so needed the near 35 inch capability on this product. However, I had already spent probably an hour trying to decipher the poor manual and random jumble of parts of the VideoSecu product.
When this arrived, I was thrilled and awestruck by the difference not only in quality (ex. the extension arm is much more solid and adjustable), but most importantly in the clarity of the instructions and the superb packaging of all the materials so it is very easy to assemble. I was done putting this together in under 20 minutes as a result.
I have an Epson 2040/2045 which only has 3 mounting holes. No problem, I removed two of the four arms. I used the thick M-L spacers on all 3 holes but used an additional M-I (thinner) on the front 2 holes and the slightly thicker M-K on the back hole, to adjust for some of the space difference by not using an arm for the back hole (so the front 2 holes had MI and ML, the single back hole had MK and ML). I then used the same M-B screw on all 3 holes that are screwed into the projector (for the back hole that is being connected via the mount body instead of an arm, you just swap out the screws).
Anyhow, this is stable, incredibly adjustable, and the cable management works great. I am very pleased with the whole experience with this product....and now just have to figure out what to do with that inferior VideoSecu mount.
- Product Dimensions: 23 x 10.5 x 13.5 cm ; 1.25 Kg
- Boxed-product Weight: 1.2 Kg
- Item Model Number: QG-PM-002-BLK-S
- ASIN: B01822PS2W
- Date first available at Amazon.com.au: 25 October 2017
- Average Customer Review: Be the first to review this item
- Amazon Bestsellers Rank: 92,944 in Electronics (See Top 100 in Electronics)