OnePlus 6 Screen Protectors, Twin Pack of Orzly 2.5D Pro-Fit Tempered Glass Screen Protector for Oneplus6 (Case Compatible)
Fulfilment by Amazon (FBA) is a service we offer sellers that lets them store their products in Amazon's fulfilment centres, and we directly pack, ship, and provide customer service for these products. Something we hope you will especially enjoy: FBA items qualify for FREE Delivery.
- Orzly Pro-Fit technology offers all round protection for your phone's curved screen against surface damage from day to day use, now available in a great value twin pack.
- However the nature of the extreme curve on the OnePlus 6 means there are limitations to what can be achieved with any screen protector solution. So please read the below description carefully to understand this product fully before purchase
- PLEASE NOTE: The Pro-Fit Glass Screen Protector will only adhere to the perimeter of your phone's screen which is the only way to get a realistic edge to edge screen protector for the curved screen on the OnePlus 6.
- ATTENTION: The screen protector is also layered with a visible dot matrix grid over the display area which is essential to avoid a suction effect from occuring because of the highly curved screen on the OnePlus 6.
- In order to ensure the Pro-Fit Screen Protector is compatible with Orzly cases, it has been deisgned to leave a little room around the phone's edges
Customers who viewed this item also viewed
Have a question?
Find answers in product info, Q&As, reviews
Customers who bought this item also bought
Showing 1-1 of 1 reviews
There was a problem filtering reviews right now. Please try again later.
Most helpful customer reviews on Amazon.com
Here's what I did to install:
1.) Remove both screen protectors from the package, and take out the card stock, microfiber, and towelettes. I do this ahead of time in order to minimize the dust and particulate matter that you get from tearing up packages.
2.) Turn shower on hot, full blast. Let it run for about 3-4 minutes or until you notice condensation in the mirror, whichever comes first.
3.) Take phone and materials into bathroom, and begin.
4.) Remove the phone from the case. Unlike the OP OEM screen, this screen does not go flush with the stock bumper case. I tried to install with the case on, and it just leads to misaligns. You could leave it on if you want, though.
5.) Use towelette first to wipe down the screen, then the microfiber to dry it down.
6.) Separate screen from the plastic backing. You might notice condensation on the backside of the screen. Don't panic like I did. It will not affect the install.
7.) Align using the notch at the top. Even if you elected to leave the case on, this would be the best marker to use. It can be slightly maddening, because after my first three installs, I noticed that it was ever so canted. Practice makes perfect and now, it looks very presentable.
8.) Unless you apply screen protectors for a living, you're going to have bubbles. The good news is that if you cleaned it perfectly in a super humid bathroom, none of these should be caused by dust. All you need to do is to press the ever living hell out of the spot to get it to go away. I took probably 5-10 minutes of just applying pressure with my index fingers and thumbs, then later my knuckles after the first two got sore.
Things to consider:
-Between the protector and the stock case that comes with the phone, there's about a 1mm to 1.5mm gap all the way around. I actually prefer this, because I don't think the case is ever gonna catch an edge and dislodge the screen if I ever wanna remove the case.
-Due to the alignment issues, I had to remove the screen twice, and was successful on my third application attempt. Adhesive is still holding up fine, and I have a backup protector for a rainy day.
The good: it's really clear and smooth. No touch interference. No scroll stutters. No image or color distortion. And this isn't some cheap piece of film. It's a legit full-on screen protector. Easy to install and remove. (But watch out for those dust particles!)
The bad: it's not great for a "naked" phone experience. Because of the thickness (a good thing so it protects your screen), it's raised ever-so-slightly around the edges. Somewhat annoying if you don't wrap your device in a gel case or (ugh) a huge chunk of plastic. If you're a case user, though, you won't be affected by this.
The worst thing? The issue that makes me want to rip this off my phone and throw it away? The black border. Not that it has a border, understand. It's that the border is actually smaller than the visible screen.
That might not be such a big deal for some less appealing devices, but this is on my OnePlus 6 with so much beautiful screen to stare at. And several pixels are being obscured by the screen protector. All. The. Way. Around. And the corners... don't even look there because they're gone.
Yes, I'll say it: I hate this screen protector for hiding my pixels. I probably will not use it permanently because of this. If not for the intrusive black border, I'd keep it on for a while.
Now, let me suggest, however, that this protector is not necessarily wrong for you. If you're a normal person who wraps his/her device in a case anyway, especially those about the size of a compact car, you may be accustomed to some screen obstruction. This thing will provide a good bit of additional protection without disrupting your experience. Give it a shot.
Naked phone lovers? Depending on how easily distracted you can be, you may need to shop around.
Orzly, if you have one of these without the colored border, I just might love it. If you don't, please consider making one.
Well good thing they bring two protectors. Messed up the first one, due to dust and not having a proper clean area to place it on. Adhesive lacks on the edges.
I had to sit on my phone while on the bed to get the top edges to finally set after pressing it down with my thumbs for about 15 minutes.
The glass is too notch though way better than the stock screen protector. Actually feels like the OEM OLED screen which it awesome.
I use the gesture controls exclusively and the screen responds very well. No issues to note.
Currently using the sandstone case and works without any flaws. Great fit for price and protection. Highly recommend but use a clean area and prep before applying the Screen protector. Just wish it had more adhesive on the edges...hence dropping that last star.
But why the price hike ORZLY?
Had to drop a star cause although I was sent replacement screen protectors they failed prematurely. I think this is due to the attempt to curve the sides to hug the curves of the screen making it very brittle. The screen itself looks and feels great but it just doesn't last very long for a heavy user with minimalistic sensibilities and cases.