Other Sellers on Amazon
+ $18.05 delivery
+ $104.62 delivery
NZXT H210i - Mini-ITX PC Gaming Case - Front I/O USB Type-C Port - Tempered Glass Side Panel Cable Management - Water-Cooling Ready - Integrated RGB Lighting - Steel Construction White/Black H510
- New features: front I/O USB Type-C port and tempered glass Side panel with single screw installation
- Enhanced cable management: our patented cable routing kit with pre-installed channels and straps makes wiring Easy and intuitive
- STREAMLINED COOLING: Two Aer F120mm fans* included for optimal internal airflow and the front panel and PSU intakes include removable filters, designed for radiators up to 240mm - simplifies the installation of either closed-loop or custom-loop water cooling
- Motherboard Support: Mini-ITX, MicroATX, and ATX
Customers who viewed this item also viewed
Customers who bought this item also bought
Have a question?
Find answers in product info, Q&As, reviews
Your question may be answered by sellers, manufacturers, or customers who purchased this item, who are all part of the Amazon community.
Please make sure that you've entered a valid question. You can edit your question or post anyway.
Please enter a question.
From the manufacturer
H510 Mid-Tower ATX Case
The H510 compact mid-tower ATX cases looks stunning and is an excellent value, making it the ideal case when you want a small-footprint ATX case without sacrifice. Well-engineered airflow, removable radiator mounting bracket, flush tempered-glass window, multiple fan filters, and a front panel USB-C connector are just some of the key features.
|Dimensions||W: 230mm H: 494mm D: 494mm (Without Feet)||W: 210mm H: 460mm D: 428mm (with feet)||W: 210mm H: 349mm D: 372mm (with feet)|
|Motherboard Support||Mini-ITX, Micro-ATX, ATX and EATX (Up to 272mm or 10.7-inches)||Mini-ITX, Micro-ATX, ATX||Mini-ITX|
|I/O Ports||1 x USB 3.1 Gen 2 Type-C 2 x USB 3.1 Gen 1 Type-A 1 x Headset Audio Jack||1 x USB 3.1 Gen 2 Type-C 1 x USB 3.1 Gen 1 Type-A 1 x Headset Audio Jack||1 x USB 3.1 Gen 1 Type-A 1 x USB 3.1 Gen 2 Type-C 1 x Headset Audio Jack|
|Filters||All Air Intakes||All Air Intakes||All Air Intakes|
|Drive Bays||2.5”: 7 3.5”: 2+1||2.5”: 2+1 3.5”: 2+1||2.5”: 3+1 3.5”: 1|
|Radiator Support||Front: 2 x 140 or 3 x 120mm with Push/Pull Top: 2 x 140 or 3 x 120mm Rear: 1 x 120mm||Front: 2 x 140 or 2 x 120mm with Pull Rear: 1 x 120mm||Front: 2 x 120 with Push/Pull Rear: 1 x 120mm|
|Fan Support||Front: 3 x 120/2 x 140mm (3 Aer F120 Case Version included) Top: 3 x 120/2 x 140mm Rear: 1 x 140 (1 Aer F140 Case Version included)||Front: 2 x 120/2 x 140mm (1 Aer F120 Case Version included) Top: 1 x 120/1 x 140mm Rear: 1 x 120 (1 Aer F 120 Case Version included)||Front: 2 x 120/2 x 140mm Top: 1 x 120mm (1 Aer F120 Case Version included) Rear: 1 x 120mm (1 Aer F120 Case Version included)|
No customer reviews
|5 star (0%)||0%|
|4 star (0%)||0%|
|3 star (0%)||0%|
|2 star (0%)||0%|
|1 star (0%)||0%|
Review this product
Most helpful customer reviews on Amazon.com
The front fans do not have adequate intake space. I had to mount an intake and aftermarket filter in the top fan slot in order to achieve positive pressure. Typically you would want this fan to be an exhaust, but because the intakes fans do not get adequate air, using the top slot for an exhaust would cause negative pressure and eventually dust issues.
Probably the worst issue for me is build quality. ALL hand tightened screws were VERY over tightened, to the point of warping the metal where they are used. I had to use a power drill just to loosen these. The bottom tab for 1 of the side panels snapped off pretty much immediately, so now the side panel of my case has a permanent and unsightly gap.
This is my first and last NZXT case.
The last time I built a PC, companies were just starting to get away from the ugly box designs with silver unpainted interiors, and it was pretty difficult to get a stylish case for under $200, and at that high price point you were pretty much paying for the ability to actually manage your cables with rubber grommets and the like. So I was a little discouraged when I found this case and liked it, but realized it was only $100. I assumed it was probably low quality when compared to the other NZXT offerings, but I didn't really like anything else I found, so I decided to pull the trigger and send it back if it was a piece of junk.
Fortunately, this has been the best case I've ever owned, and I was amazed at how easy it was to build in.
- Build Quality -
I'm pretty used to sharp edges, unpainted interiors, and unintuitive design choices. Even older Corsair cases, which I felt were superior in the "ease of building" department, are a joke in comparison to how great this case was.
I was worried that this case would be a bit wobbly when you took off the side panels, and I'm happy to report that it's very solid. The interior paint job is perfect, and the matte finish is actually really nice, and the case lights are perfectly placed and don't cast light cones on the glass (unless you turn them all the way up). Overall it's a great case in terms of quality.
- Building Experience -
There are slots and holes in every possible place that you could run a cable, and the backside has velcro straps and routing channels for your cables. I barely even had to try to manage my cables, and it looked better than my old Corsair 600t did after an hour of zip tying, tucking, and weaving. The back panel shut effortlessly.
The bottom part of the chassis being sectioned off was a genius design choice, because I can stuff cables in there without caring what it looks like, and often contains the most cables if you don't have a modular PSU.
I was able to put my Kraken cooler, and my 1080 ti Hybrid radiator easily within the case, with plenty of room. The airflow is perfectly fine, and both of those items stay around 26C when idling. Wonderful case, I'm nothing but happy with it.
- CAM Software -
Surprisingly, I really like the CAM software. I think in the early days of the case release it was probably pretty rocky, but for me now it worked flawlessly. I enjoy the UI and the temp monitoring, and I can easily change my fan speeds if needed. I don't let it use the fan curve where it "learns" or whatever, I just set it to quiet and turn it to performance if needed. It's that simple.
Overall, I really loved building my PC in this case, and I'm so impressed at the quality for $100.
iv noticed a low toned, but load hum from my case, at first i thought this was the stock CPU cooled, i replaced that now i notice its the glass itself slightly wiggling again the top of the case. the top of the case is cheap and very wobbly, it comes down to rest on the top of the glass. this would not a issue with other cases that have the 4 corner mounting for the glass, but this case had s single screw to hold the panel in place in the top back corner. this gives it allot of freedom and so it hums. i "fixed" the problem by folding a small cloth on the top of the front top corner of the glass and closing the cloth in the case so less vibration happens.
contacted the company, they don't seem to care to much and give me the run around for two weeks. but that does not bug me much, i would not use their fan controller again even if they replaced it with a working 1. so i original review stands. get the Non "I" model for cheaper, and buy some different led strips if u really wanted the light effects. the light controller included with the included led strips are not that great anyway, and have very few effects. worst is that both use a special plug in to work that u can only find with nzxt, so u are trapped using only their led OVERPRICED led lights. best to go els where unless u can get it on sell or clearance, then just don't plug ur fans into it.