NZXT H200i Mini-ITX Computer Case with Digital Fan Control and RGB Lighting, Black/Red(CA-H200W-BR)
We don't know when or if this item will be back in stock.
- SMART CASE: An all-new Smart Device is built in that combines features of the HUE+ and GRID+ digital controllers. Supports 3 fan channels and one lighting channel
- ADAPTIVE NOISE REDUCTION: Up to 40% noise level reduction. Automatically finds the optimal compromise between cooling and silence
- ADVANCED LIGHTING: Full features of the HUE+ digital controller includes 9 Presets, 3 Dynamic, and 1 Sync Modes for all CAM-Powered devices. Customized lighting is streamlined
- FAN CONTROL MADE EASY: Label each fan channel, build out custom fan curves, and tune fans to meet your needs. Choose a fan profile for each port: Silent, Performance, Fixed, or customize your own
- VERSATILE CABLE MANAGEMENT: Features dual-position cable management bar and cable routing kit located behind motherboard tray. Velcro straps allow you to make changes on the fly
- STUNNING TEMPERED GLASS PANEL to showcase your build
There is a newer model of this item:
Customers who viewed this item also viewed
Customers who bought this item also bought
Have a question?
Find answers in product info, Q&As, reviews
From the manufacturer
The H200i showcases NZXT’s vision for modern PC building. This premium mini-ITX case features a unique CAM-powered Smart Device that digitally drives RGB lighting and fan performance. You can effortlessly control RGB lighting and fans, while Adaptive Noise Reduction optimizes your build’s acoustics through machine learning and ideal fan settings. Includes two integrated Aer F fans and a RGB LED strip.
Smart Controls That Matter
The H200i’s unique Smart Device includes features from our HUE+ and GRID+ V3 digital controllers, allowing for effortless control of RGB lighting and fans through CAM software. Customized lighting is streamlined with an integrated and individually addressable RGB LED strip. Don’t waste time checking compatibility, installing, or manipulating physical buttons; our out-of-the box, elegantly controlled CAM software is all you need.
|Dimensions||W: 230mm H: 516mm D: 494mm||W: 210 mm H: 460 mm D: 428m||W: 210mm H: 417mm D: 421mm||W: 210mm H: 349mm D: 372mm|
|Weight||12.27 kg||7.0 kg||7.6kg||6.0kg|
|Motherboard Support||Mini-ITX, MicroATX, ATX and EATX(Up to 272mm or 10.7-inches)||ATX, MicroATX and Mini-ITX||Mini-ITX and microATX||Mini-ITX|
|I/O Ports||2 x USB 2.0 2 x USB 3.1 Gen 1 1 x Audio/Mic||2 x USB 3.1 Gen 1 1 x Audio/Mic||2 x USB 3.1 Gen 1 1 x Audio/Mic||2 x USB 3.1 Gen 1 1 x Audio/Mic|
|Filters||Front and PSU Intake||Front, Top, and PSU Intake||Front, Top, and PSU Intake||Front and PSU Intake|
|Smart Device||3 x Fan channels with Max 10W per channel output 1 x RGB LED port support up to 4 x HUE+ LED strips or 5 x Aer RGB fans Built-in noise detection module.||3 x Fan channels with Max 10W per channel output 1 x RGB LED port support up to 4 x HUE+ LED strips or 5 x Aer RGB fans Built-in noise detection module.||33 x Fan channels with Max 10W per channel output 1 x RGB LED port support up to 4 x HUE+ LED strips or 5 x Aer RGB fans Built-in noise detection module.||3 x Fan channels with Max 10W per channel output 1 x RGB LED port support up to 4 x HUE+ LED strips or 5 x Aer RGB fans Built-in noise detection module.|
|Drive Bays||2.5”: 7 3.5”: 2+1||2.5”: 2+1, 3.5”: 2+1||2.5”: 3+1 3.5”: 1||2.5”: 3+1 3.5”: 1|
|Radiator Support||Front: 2 x 140 or 3 x 120mm with Push/Pull Top: 2 x 140 or 3 x 120||Front: Up to 280mm, Rear: 1x 120mm||Front: 2 x 140 or 2 x 120mm with Push/Pull Rear: 1 x 120||Front: 2 x 120 with Push/Pull Top: 1 x 120|
|Fan Support||Front: 3 x 120/2 x 140mm (3 Aer F120 Case Version included) Top: 3 x 120/2 x 140mm Rear: 1 x 120/1 x 140mm (1 Aer F140 Case Version included)||Front: 2x120 /2x 140mm, Top: 1x 120 mm/ 1x 140mm (1 Aer F120 Case Version included) 1x 120mm, Rear: 1x 120mm (1 Aer F120 Case Version included)||Front: 2 x 120/2 x 140mm (2 Aer F120 Case Version included) Top: 2 x 140mm Rear: 1 x 120mm (1 Aer F120 Case Version included)||Front: 2 x 120/2 x 140mm Top: 1 x 120mm (1 Aer F120 Case Version included) Rear: 1 x 120mm (1 Aer F120 Case Version included)|
No customer reviews
|5 star (0%)|
|4 star (0%)|
|3 star (0%)|
|2 star (0%)|
|1 star (0%)|
Review this product
Most helpful customer reviews on Amazon.com
Super easy to build in, cable management is great, thermals are good, and the case looks amazing.
But there's a chance you will receive a unit with a defect in the glass panel that will cause it to become explosive under heat. It worked well for 5 days, but then I had to add a new hard drive. I went to unscrew the glass and it immediately exploded. Luckily no glass went into the case harming any of the components and no glass hit my face. But this is a serious danger as it is not apparent at all with your eyes until it explodes. You could be gaming and your pet touches the panel while it's hot and it explodes onto your pet. Would not risk buying another NZXT case again.
This case does a lot well, but it's not without complaints. First, the Kraken X62 (also from NZXT) does not mount to the front in pull configuration. I've tried multiple ways, and it requires either downgrading the the X52 or removing/unlocking the front air filter. I had to settle for push configuration and hide away two of my RGB fans. NZXT products not designed to work with each other is a big red flag, and you'll notice it's a recurring theme in this review.
Both the Hue+ and Grid+ units can't mount to any of the available SSD trays or behind the back panel, as they are too thick. The only place for these devices is under the PSU shroud, limiting cable management significantly. The back panel needs more clearance, or we need more mounting locations.
While I didn't use an NZXT motherboard boad, the case includes two USB 3.0 ports on the top, and has a cable that needs to connect to the motherboard. Because NZXT opted not to use a right-angle connector, there is no way to run this cable without going over the cable management bar. In other words the bar that's meant to hide your cables is visually obstructed by cables. Think about that for a moment.
The Smart Device is this product's claim to fame, and it works well. I had no problems with running 5 fans off it. Unfortunately the included LED strip can't sit on the same channel as NZXT's premium AER RGB fans, so you have to pick one or the other. Once again I had to compromise, and I elected to remove the LED strip in favor of LED fans. Thankfully this was relatively painless. HUE2 released this month and fixes the problem of one accessory type per channel, but unsurprisingly the smart device doesn't currently support HUE2 products.
Lastly removing the front panel to get at the air filter requires pulling apart plastic snaps that hold the front panel in place. This is the only area of plastic in the case I noticed besides the filters, but the problem here is the likelihood of that plastic bending or snapping a few months down the road. A metal or thumbscrew system like they used with the PSU and back panel would have made more sense.
Don't get me wrong, after more than 24 hours of building, build revisions, and cable management, this case now looks and feels like a premium product, and I do really like it. It just seems like NZXT designed a premium case while forgetting we might want to use premium NZXT products in it. So what's the final verdict? If you don't mind revising and tailoring your build to work with your case, this is a great option. If you're looking for a case that will highlight the components you've already picked out, this may not be for you.
•The cable management is superb having in mind it is a mini itx case. Then top it with “hey I used extensions” which adds more clutter to my dear cable mess.
•The airflow is nice. I was ready to mod the case in case it was lacking but so far my temps are alright.
•The looks! I look at it way too much...yes it’s a gorgeous little thing! Sturdy yet beautiful!
•It has that funny fan/LED strip controller to go with the HUE+. I only use the LED but it’s nice to control it from the CAM app.
•If you are coming from a mini itx case don’t fear if you have an SF(X) power supply! It comes with a removable bracket!!! (This was a nice touch if you ask me.)
•The bracket behind the motherboard for the 2 2.5” SSDs/HDDs is very nice with more room for more drives!!!....is this really a mini itx case?!?!?
•My Asus Strix does not sag in this case? Nope it doesn’t. Has more support on the PCI slot.
•2.5 bracket in front of the window is nice but I won’t use it since I will replace with a 5” LCD screen.
•That cable shroud metal thing (see in pics) which has been around since the s340 is nice and only takes 3 screws to remove.
•DUDE!!!! The front panel plug is HEAVENLY! I always struggle with this ton of small cables....now the one here is a single plug with all the cables! I fell in love!
•Room for rads and moar fans!
•The tempered glass is not as strong as I thought or I would like. Turned around to get the thumb screws and it slipped...2” fall at most and a small corner went off...
•Yeah I got nothing else until my custom loop begins.