The connections must be in towards to the arrows.
Don't left them on the spool when you testing them more than 2 mins. They need to dissipating heat.
Clean the surface before stick on the strip.If it is not sticky enough, you can add some double sided tape. The ventilation must be ensured.These lights need an excessive amount of airflow for cooling.
Please don't stick the lights to metal surface that conductive. It may cause a short-circuit on the strip light.
Low power consumption,Super-bright but running with low temperature,Long lifespan >50,000 hours.
Self-adhesive back with Adhesive tape for secure and easy application.
Cuttable every 3 LEDs along the cutting marks.
With a DIY function which you can customize your own color.
Color:RGB LEDs Number/M: 60pcs/m;
Waterproof Rating: IP67 Waterproof or IP44 Non-waterproof
Input voltage: 12V DC
Max output current:2A/ each channel
Maximum output power: 60W
Control mode: IR
Output: 12V DC, 3 * 2 A
Connect mode: Common Anode
Work temperature: -20~60 degree
Control distance: 5M (must be poniting at the sensor without any obstacles)
Input: 100-240V AC 50/60Hz
Max Current: 5a
Max Wattage: 60W
1 x LED strip light
1 x Power supply
1 x 44key Remote (NOT include battery)