Fractal Design Black
- Streamlined high-airflow design; Two preinstalled Fractal Design Dynamic X2 GP-12 120 mm fans deliver optimum airflow with minimal noise
- The performance and capacity of a larger tower in a remarkably compact mATX designed tower
- Angular mesh front panel maximizes air intake
- Tinted tempered glass side panel for a clean looking exterior with full interior visibility
- Distinctive styling with stealthy black-on-black aesthetic
Frequently bought together
Customers who viewed this item also viewed
Have a question?
Find answers in product info, Q&As, reviews
Your question may be answered by sellers, manufacturers, or customers who purchased this item, who are all part of the Amazon community.
Please make sure that you've entered a valid question. You can edit your question or post anyway.
Please enter a question.
From the manufacturer
About Fractal Design
Fractal Design is a Scandinavian designer and manufacturer of PC hardware including cases, cooling, power supplies and accessories.
Based in Gothenburg and with offices in the US (Dallas) as well as Taiwan (Taipei), Fractal Design has gained a global reputation for design, aesthetics and build quality. Fractal Design products are available in over 45 countries worldwide, and counting.
Fractal Design Meshify C Tempered Glass
Style meets substance
Meshify strikes an aggressive pose in the Fractal Design lineup with unparalleled cooling performance and a defiant new look.
Like diamond facets, the angular asymmetry of the Meshify C carves a space uniquely its own as a new dominant force in high-airflow design with stealth-inspired aesthetics for exceptional style.
A compact yet spacious open layout creates an unrestricted airflow path from front intakes directly through key components to exhaust, ensuring heat is never an issue.
- Streamlined high-airflow design
- Performance and capacity of a larger tower in a compact mid-tower size
- Angular mesh front panel maximizes air intake
Flexible storage options
Conceal up to 5 storage devices with an adjustable and removable drive cage beneath the PSU shroud plus dedicated SSD mounts behind the motherboard tray.
Versatile hardware support
Even the largest enthusiast-class GPUs leave plenty of room for thick triple-fan rads in the front. The adjustable drive cage can be moved or removed to fit even the lengthiest heavy-duty PSUs.
An open interior with full length ventilated steel power supply shroud hides drives and cabling to create an unobstructed airflow path from front intake to rear exhaust.
Easy-to-clean filters on the front, top, and base with full PSU coverage and convenient front access
Superior air cooling
7 total fan positions allow for extensive air cooling. Two Fractal Design Dynamic X2 GP-12 fans come preinstalled for maximum airflow, minimal noise and 100,000 hour life expectancy.
Sturdy steel trays and vibration-dampening rubber grommets cushion your drives for smooth, quiet and reliable operation.
|Fractal Design Ion+ Platinum 760W||Fractal Design Color Mesh Panel||Fractal Design Celsius S24 AIO||Fractal Design Prisma AL-14|
|Category||Power Supplies||Front Panels||Water-Cooling||Fans|
|Description||The Ion+ Platinum is a high-performance fully modular PSU with whisper-quiet operation, enhanced cable flexibility and superior output quality||If you thought your Meshify C made a bold statement before, just imagine it with the expressive look of a customized mesh front panel from Fractal Design.||Our all-in-one solutions offer more effective heat transfer and quieter operation with a simple, clean-looking installation.||Prisma AL-12/14 allows precision software control, enabling Prisma to synergize perfectly with your components|
Customers who bought this item also bought
No customer reviews
|5 star (0%)||0%|
|4 star (0%)||0%|
|3 star (0%)||0%|
|2 star (0%)||0%|
|1 star (0%)||0%|
Review this product
Most helpful customer reviews on Amazon.com
The case is actually slightly shorter than most mid-towers, meaning that you might be able to fit this case in a variety of smaller areas in your room.
Even with the smaller length, I was still able to fit a full size EVGA RTX 2080 XC ULTRA graphics cards AND a H150i pro 360mm AIO from Corsair in the front with about an inch to spare in between them. Incredible!
The case supports the 360mm AIO by removing a bracket near the front of the case on the top of the sleek power supply shroud, and can support 6 fans in total. The top fans are brought towards the side panel, meaning that if you are fitting 120mm fans you will not have any interference with your motherboard. However, I don't think you'd be able to fit two 140mm fans up there even if you tried.
The front of the case has that mesh that allows the front fans to breathe almost completely unobstructed, which is awesome. My 9900k is running at only 72 degrees C with a balanced pump power and low RPM fan speed.
The cable management of this case isn't the best I have seen, but it definitely isn't the worst either. You can fit most of your large cables into the channel on the left side of the back panel, and since I have RGB fans, it looked like a spaghetti monster until I cable managed. It supports three SSD's on the back of the motherboard tray and up to two hard drives if you are not using a 360mm radiator like I am.
Awesome case that looks good and is easy to build in. Definitely reccomended!
Dust filters: The front, top, and bottom are all covered with easily removable dust filters, which is quite impressive. I consider this case one of the best options for a PC that sits on the floor, although I would still point the power supply fan upward through the perforated shroud rather than down towards the carpet.
Drive compatibility: I have no fewer than five disks mounted in this case: two 3.5" desktop HDDs, two 2.5" laptop HDDs, and one 2.5" SSD. You can add a sixth M.2 SSD which doesn't take up room in the case, but only if your motherboard supports it. Keep in mind that you should try not to use ANY right-angle SATA cables in this case, as they will not play nicely with the drive mounts.
Airflow: One of this case's big selling points is the airflow, and I would have to say it delivers. There's no need to stuff this case with fans because unlike most other modern cases, there is no solid front panel choking the airflow, so each fan can blow freely and quietly.
Overall, I would have to say this case perfectly satisfied all of my needs. The only nitpick I have is that the power indicator isn't RGB, so it might break your color scheme unless you unplug it.
You can mount up to 7 fans in this case, which is ludicrous for the tiny size of it.
- Front: x2 140mm or x2 120mm. x3 120mm if you remove the detachable hard drive cage.
- Top: x2 140mm or x2 120mm
- Rear: x1 120mm
- Bottom: x1 120mm, if you remove the detachable hard drive cage.
Cable management is a breeze with the positioning of holes and tie-down points, along with rubber grommets to keep everything tidy-looking from the front.
Case construction feels solid, nothing feels like it's going to fall off or snap out of place. I should know - I had to take apart my build a few times and walk around with the case completely stuffed with 30+ pounds of computer components, and there was no problems whatsoever.
My only gripe with this case is the front panel, which compared to every other part, is a pain to remove. In addition, there are cables attached to the front (for the power and reset buttons, along with USB and headphone ports) which could be broken or damaged if you're not careful removing the front panel. However, it's not enough for me to dock a star - and as long as you're careful it won't be too big of an issue.
Much more compact than many other ATX mid towers.
Good air flow.
Great cable management.
Fits 280mm radiator.
Includes 2 120mm fans.
With radiator up front can make it a tight fit for some graphics cards. My EVGA SC Black GTX 1080 ti barely fits.
Needs compact power supply or you’ll have to remove hard disk drive cage(which is fine if you don’t have any 3.5 drives because you can mount 3 2.5 drives behind the motherboard).
Included fans are a little noisy so I replaced them with Noctua fans which are infinitely quieter but also very expensive (in my case I have 2 140mm on EVGA clc 280, 2 140mm on top and 1 120mm for exhaust).
Tempered glass is a finger print magnet.