SOLDER SEAL WIRE CONNECTOR --SOLDER AND SEAL IN ONE QUICK CONVENIENT STEP

1.Waterproof Wire Connectors would prevent wires from corrosion. 

2.Solder and Hot Melt Adhesive inside can be perfectly Waterproof. 

3.Transparent Sleeve of the butt connectors provide Visual Inspection. 

4.Dual-walled design tubing: polyolefin tubing on the outside and hot melt adhesive inside 

5.You can control the operating temperature and heating time. 

Compliant with ROHS, ISO 9001:2008, SGS and CE standards. 

Specification:

30 White Wire Connectors: Heat Shrink Tube Diameter 1.7 mm, Cable cross-section 0.25-0.34 mm²(A.W.G.:26-24).

45 Red Wire Connectors: Heat Shrink Tube Diameter 2.7 mm, Cable cross-section 0.5-1.0 mm² (A.W.G.:22-18);

40 Blue Wire Connectors: Heat Shrink Tube Diameter 4.5mm, Cable cross-section 1.5-2.5 mm² (A.W.G.:16-14);

15 Yellow Wire Connectors: Heat Shrink Tube Diameter 6.0 mm, Cable cross-section 4.0-6.0 mm² (A.W.G.:12-10)

Operating temperature range: 

Shrinkage ratio is 2:1

Minimum temperature for solder to melt: 138°C  (280 ℉)

Minimum shrink temperature: 80°C  (176 ℉) 

Operating temperature :-55℃ - 125℃ 

Note: The Minimum and Maximum Temp. are the temp. for connector surface.

Friendly After-sale Service & Guarantee ：

we are focusing on providing home improvement electric wire products to our customers.If you still use the old wire connection method such as insulating tape, we recommend that you use this solder seal wire connectors, because it can make your work more convenient,the joint location is more beautiful, the effect is more remarkable and the operation is also more secure.If you encounter problems in the process of shopping and using, please contact us！