- Get 90 DAYS FREE of Amazon Music Unlimited with purchase of an eligible product. Listen FREE for 90 days. Learn more here.
PERLESMITH Tilt Low Profile TV Wall Mount Bracket for Most 32"-70" LED, LCD, OLED and Plasma Flat Screen TVs - Holds up to132lbs, with VESA up to 600 x 400mm,Fits 16-24”Wood Studs,HDMI Cable Included
- 【32" - 70" UNIVERSAL & 100% Satisfactiion Promise】: this TV mount is majority TV compatible. It’s fits VESA from 200mm*100mm(8"x4") to max 600mm*400mm(23.6"x16’’). Please check VESA compatible range, TV weight and wall stud location for convenience.
- 【Sturdy Frame Weights up to 132lbs(60 kg) & Space Saving】: made of high quality steel, the mount is proved to hold 4 times the weight of UL standard. 1.2’’ Low-profile design makes the TV stay close to wall for space saving, tidy and secure.
- 【Easy Installation】: Hang your television like a pro! Easy to install on 16 inch, 18 inch and 24 inch wood studs with standard hardware. It’s locking mechanism with quick release makes installation even more easy.
- 【Appropriate Motion】: your TV can be tilted forwards/backwards for 7 degree to avoid the irritating glare from the screen. It also can be adjusted laterally for perfect centering on the wall.
- 【Package Content】: Standard mounting hardware+6ft HDMI cable+5 pieces pack of cable tie. | Every Perlesmith product is backed by 5 years’ product quality guarantee. If any question, please contact us for an instant answered (usu. within 24hrs).
Special offers and product promotions
Frequently bought together
Similar products rated highly on "Value for money"
Have a question?
Find answers in product info, Q&As, reviews
Your question may be answered by sellers, manufacturers, or customers who purchased this item, who are all part of the Amazon community.
Please make sure that you've entered a valid question. You can edit your question or post anyway.
Please enter a question.
PERLESMITH Mount -- Make Your World Better
The tilting wall mount is suitable for 32" - 70" flat-panel TVs. Its tilting system makes it easier to adjust the viewing angle. The design ensures TV mounting stability and security. Adjustable TV brackets offer lateral shift movement to allow perfect TV position, even with off-center wall wood studs. TV is positioned just 1.2" / 30.4 mm from the wall for a clean, low-profile appearance. Comes with a 6 feet HDMI cable, a 6 inch 3-Axis Magnetic bubble level and 5 pcs cable tie, to save you time and money!
Please check whether the mount is suitable for your TV:
First, please check your wall for wood studs. Our mount can also be used on concrete walls however, concrete anchors are not included. It can't be used on drywall.
Next, the weight of your TV should be less than 132lbs (60kg).
Finally, look at the back of your TV. Find the mounting holes and measure the horizontal and vertical distance. If the horizontal distance is within 24" and the vertical distance is within 16", then the bracket will work perfectly for you. The width of your TV should be 26" or above. Otherwise the mount is too wide to hide behind your TV.
Tilts up to 7 degrees for an optimal viewing experience
Designed for 32" to 70" LCD, LED, OLED, plasma monitors and displays
Supports TV weight up to 132 lbs (60kg)
Well engineered structure made with Less Metal - Green design makes the mount sturdy and stronger with less metal. The design ensures TV mounting stability and security
Customers who viewed this item also viewed
Customers who bought this item also bought
Review this product
There was a problem filtering reviews right now. Please try again later.
The tv we had is 55 inch and this tv wall mount is suitable for our application .
This tv wall mount unit comes with every single bit of tool we need like screw and nut , as well as the magnetic level . It also comes with some cable ties with enable us to manage our wires neatly and hide behind the tv unit .
The structure of this unit sound very riding and durable . The weight of it is quite light .
The installation part of it is quite easy as they has provided most of the tool and if follow the manual , one can install it in 15 minute .
Very happy on this purchase
This does a great job and includes some really neat extras such as velcro cable tie, level indicator, extra HDMI cable.
The lock/unlock process is great. It's easy to install. Plus it's a bargain at this price.
A simple well made wall bracket that is cheap and well packaged.
Challenging to attach the cables after hanging it on the bracket since it sits very close the wall. The HDMI cable provided is of poor quality it snapped while attaching to the TV, would have returned this product if I didn’t invested too much time and energy installing it.
Top international reviews
However if it's also so close to the wall that fishing wires between the TV and the wall is extremely difficult, and putting the wires in first makes it challenging to hang the TV on the rack. I actually had to use an electrical fish line meant for running wires behind drywall.
If I were to start the purchase process from scratch I would buy one that would swing out, simply for the sake of installing wires and then being able to push the TV back against the wall.
Maybe the only issue is there is little room after you get the TV positioned on the wall to attach any cords, so be sure everything is hooked up prior to hanging your TV. If your TV AV ports/HDMI ports are facing towards the back and not down, you're going to probably need a 90 degree adapter to use this wall mounting system. Double check the back of your TV before your order to save yourself the hassle.
My previous Echogear mount had a few inches behind it - enough to fit a Direct TV large Genie box behind the TV. This mount DOES NOT. It has a much thinner profile, the TV is practically up against the wall. There's absolutely no ability to fit the Genie behind the TV now.... which can be a great thing, just something to be aware of. The small Direct TV pilot boxes would not be a problem to fit there.
More pictures to come. Feel free to post questions.
The mount came with a package of every type of bolt and spacer imaginable to attach the mounting arms to your TV. My TV already had the bolts so I didn't need any of them but it was wonderful that they included them. It also had the hardware to attach the other part of the mount to the wall. The slots on the wall portion of the mount give you some leeway in positioning the mount on 16" center wall studs, but if you have a large TV (like my 65" screen) with the 16 X 24 VESA bolt pattern you will only have an inch or so horizontally to move TV on mount once hung, so plan ahead when you decide where to hang the wall portion.
My wife and I were able to easily lift (and then lift again when I forgot a speaker wire that needed to be run behind the TV) the TV and hang the TV portion of the mount on the wall portion. Perhaps we were just lucky, but there was no "fishing around" for the right height like when trying to hang a picture on the wall with those little triangle rings on the back. We just lifted and placed. The mount allows you to tilt the top of the TV out a couple inches and in fact if you have a heavy TV you should decide before hand if you want it to tilt or not because out of the box mine ends up gradually moving into tilt position. There are screws you can tighten to end the tilt, but you will have to take the TV off the wall to do so so again, best to plan ahead and decide if you want to tilt or not before hanging.
The HDMI cable included seems to work fine. I hooked it up to a Roku box with no apparent issues.
If I had to make one change it would be this, and it is a minor one. There are two hanging straps that allow you to reach under and behind the TV to unlatch the TV portion of the mount from the wall portion if you need to remove the TV from the wall. At least with my large 65" TV, those straps are just a little too short to reach up far enough to make it easy to grab if you have big hands like mine. I can just barely get my fingertips on it and pinching it between my pointer and middle fingers and pulling does release the latches because there is very little pull strength needed, but it is difficult to get between my fingers. I understand this would not be an issue with a smaller TV so if there was a way to adjust these straps beforehand then this mount would be absolutely perfect. This isn't a major enough gripe to dock a star, however, as one likely will never use these straps after the initial mounting until they are ready to dismount the TV for good.
Oh, one other thing... the included level is great as a toy for my 4 year old, but not as a real tool. It is usable in a pinch (even though the bubble may not be centered on a flat surface if you swap level end to end and make sure the bubble is hanging the same amount out of the center on each side when you swap ends then you can still make something level.) I didn't use the included level anyway so no big deal.
In all, great mount that does what it is supposed to with comprehensive instructions and more included hardware than you will use.
The kit comes with everything you will need and even an extra HDMI cable. My favorite addition is the leveler which I actually plan to keep in my toolbox due to its practical size.
Finally, the customer service was great, I contacted about switching backplates and got a response in under 24 hours.
Overall for the value you can't go wrong, only thing I would do is measure studs before you order so you know if you're gonna need this large version for 24' or if the 16' will do it for you.
I was hesitant to buy this TV wall mount because of the price of the TV, what if we do it wrong and the TV ends up falling, my husband and I are not really handy like that. We were thinking about hiring a specialist from a tech store to be sure it was done right, but after reading the reviews and the product description my husband and I agreed to give it a try. There were others more expensive TV mounts, but this one seemed to have everything we needed, and the price was really accessible, so we order it. We are facinated with the time, the product, the instructions the quality, everything was outstanding. The product arrived early, the instructions were super clear and easy to follow, the product's quality was really excellent, all and all an excellent buy, HIGHLY RECOMMEND THIS Perlesmith Tilt Low Profile TV Wall Mount. It sits very close to the wall, as a matter of fact just be careful if you have a chrome or a roku stick, if this is on the back of your TV, it will not fit. We had the fortune to have both, on the back and on the side, so we were able to plug in our roku stick on the side, it would not fit in the back because the mount is just so close to the wall, which is a good thing for aesthetic purposes. The kit also included a level and 5 velcro belts to secure the cables, how wonderful and useful, they really thought about all the little details, and that really sets them apart.
The mount is two pieces that screw together in the center. Even the slightest discrepancy in the engineering will prevent you from ever having a level TV. The two pieces go together and there are 4 screws. Measure level in the center, hang the tv, its leaning to the left? How the center of the mount says level? Do it again, look again, same result. The metal at the connection on the left side, hangs just enough that when the tv is connected, it will look crooked. sorry but I wouldn't recommend this if it was free.
The thing that ultimately bugged me to give this a 2-star review, is what may require me to replace the mount (and return it to Amazon) in the next week or so when I grab a replacement. When you adjust the top hooking clips to achieve the maximum tilt angle, the lower hooks will not fit onto the mount! The metal that the security hooks attach to actually interferes and prevents the bottom from attaching. That picture in the product info here on Amazon showing the hooks fully out? Yeh...you'll barely get half of that. Essentially, as you extend the hooks out, the distance between the upper hook and the lower catch closes. Once you get the hooks extended about half way, that distance is so small that it will no longer clear the mount. The mount is also too shallow, using screws/nets to secure the top mount angle, to attach it and increase the angle after mounting it.
Cons- The instructions should include what is included in the package. They should disclose on the website what size drill bit ( 5.5 mm/ 7/32) is required /optional for the lag bolts on the website description and whether it is included or not.
The straps and their mechanism to secure the TV on the mount did not work smoothly. Due to low profile it is hard to see if the straps have secured it or not. The straps part that locks it to the mount is made of part plastic that could break off easily if you apply some force to it to check if it is secured or trying to take the TV off the mount. Be careful with it. For me, the straps mechanism did not work as advertised. It could be faulty but I would probably try another mount next time.
Due to low profile, I had to wire the TV (HDMI, Power cord etc.) before hanging the TV on the wall.