Step 1. Clean the back side of your HDTV with wet cloth and let it natural air dry;
Step 2. Peel off one side of the 3M adhesive tape;
Step 3. Stick it to the back side your HDTV/desktop monitor;
Step 4. Connect the USB connector to power on.
Remote control: RF wireless remote control
Number of key: 17
Control distance: 8m/26.2ft
Functions: Dynamic speed adjusting, dynamic mode adjusting, static color adjusting, direct color selection, and brightness adjusting
Remote control?powered by: 1*CR2025 button cell(included)
Supply voltage: DC 5V 1A
USB cable length: 1m/3.28ft
Total length: 2m/78.7in
LED quantity: 60 LEDs
Light color: 20 static colors
Light mode: 19 modes
1.The strip light will work normally when USB output power exceeds 5V 1A; When output power is lower than 5V 1A, the light will fade away, or the remote control will be malfunctioned temporarily when the light color is close to white, or it will be permanently damaged.
2.If you install it on bike, motorcycle, cabinet or any others without USB port, a mobile power bank is required for power supply.
1*Lighting Strip Light